Pilbara Iron Ore Maintenance

The AC 100-4L is the most compact crane in its class, with a width of only 2.55m. Yet, it delivers impressively strong lift capabilities. With a long telescopic boom (59.4m) and a 10m swing-away jib for a total of 69.4m, this crane offers the longest system length that can travel on four axles at a 12t load level.

The AC 130-5 is the most compact crane in its capacity class, with a total length of 14.45m and a carrier width of 2.75m. The crane’s single engine concept, start-stop function, and an intelligent motor management system keeps operational costs low and reduces maintenance needs.

The agile AC 160-5 can squeeze into nearly any situation, with a width of only 2.75m and total length of 14.51m. Its 5-axle steering system, independent rear axle steering, and dynamic launch control enable it to navigate areas that would bog down other cranes.

The Franna AT 20-3 is a mid-sized, mobile pick and carry crane with a maximum lifting capacity of 20 tonne. Boasting maximum safety features and superior capabilities than that of other pick and carry cranes in the field, the Franna AT 20-3 is an excellent mobile pick-and-carry crane able to operate in a wide variety of locations and site conditions.

The powerful Tadano ATF-220-5.1 can accommodate extremely high holding loads even in an intermediate area. Telescoping under load is possible up to 47.6t. It also boasts a lifting capacity up to 133t without auxiliary equipment.

The Franna MAC 25-4 is a mobile articulated crane with a maximum lifting capacity of 25 tonne. The MAC 25-4 offers maximum safety, excellent roadability, intuitive operation and unmatched versatility. Over the years it’s design has been tried, tested and proven in a range of difficult lifting applications and is still a customer favourite today.

The AT 40 is the newest addition to the Franna pick and carry portfolio, incorporating the latest technology with engineering excellence. With a huge maximum lift capacity of 40 tonne, this articulated crane boasts 44% more load moment than the MAC 25.

The Grove RT875 rough terrain crane has a capacity of 75 tonnes and a 4‑section boom with a maximum length of 38.1m. It has a telescoping swing-away lattice extension of 18.3m, with an optional lattice extension of 10.6m. It also features rugged a deep box section frame designed to handle tough conditions, and a host of other features which enhance its usefulness and flexibility at the job site.

The Liebherr LTM 1095 all-terrain mobile crane has a maximum lift capacity of 95 tonnes, and a maximum telescoping main boom length of 58m, the longest in its class. It also has a lattice jib extending to a maximum of 26m. This crane features an unusual two-engine design with a performance-matched Liebherr crane engine to ensure efficient crane operation.